Corvette Adapter Kit
The Corvette Adapter for the Adjustable Height Body Cart includes three items:
- A front support bar for the radiator support holes
- A rear support bar for the back two frame holes
- A shorter center piece, which allows the center four posts to get under the main tub area.
The front and rear support can be positioned front to back and up/down 10". The top is a piece of angle iron 36" long. This gives a flat surface that you can drill to match the hole patterns on your series of Corvette.
Here you can see the front support assembly.
Here you can see the rear support assembly. The Corvette Kit mounts on our Adjustable Height Body Cart, either the hard caster or rubber tire version.
The top post has a flat surface with bolt holes for securing a body to the cart. There is also a side flange that can be bolted on to give a vertical side to allow clamping a unibody frame rail to the cart. The top post have rubber pads to protect the body from scratching.
| Product | Price | |
|---|---|---|
| All Body Carts are unpainted. | ||
| Body Cart (Fixed Height) with 5" Hard Casters | $300.00 | |
| Body Cart (Fixed Height) with 10" Rubber Tires | $400.00 | |
| Body Cart (Adjustable Height) with 5" Hard Casters | $400.00 | |
| Body Cart (Adjustable Height) with 10" Rubber Tires | $500.00 | |
| Heavy Duty Body Cart (Adjustable Height) with 5" Hard Casters | $550.00 | |
| Heavy Duty Body Cart (Adjustable Height) with 12" Rubber Tires | $700.00 | |
| Corvette Adapter Kit (for the Adjustable Body Cart) | $95.00 | |
| To order call toll-free 877-283-9755 or use the online shopping cart buttons above. | ||